For Sanitary or CIP (Clean-in-Place) Applications. The OMEGA PX3005K has been issued 3-A symbol authorization and meets the requirements of the 3-A Sanitary Standards for food, beverage, dairy, and pharmaceutical applications. IP67 316 SS enclosure protects against harsh environments. 5 digit display for easy monitoring. +/- 0.2% URL accuracy for precise pressure measurements. More
Omega’s PX3005K is a compact, rangeable, digital sanitary pressure transmitter that is ideal for monitoring pressures in food and pharmaceutical industries where a flush diaphragm design is required. The rugged 316 stainless-steel enclosure is IP67 rated making it suitable for washdown environments. A 5-digit backlit LCD allows for full precision representation of process variable.
This hygienic design, the OMEGA PX3005K has been issued 3-A symbol authorization and meets the requirements of the 3-A Sanitary Standards. The best choice for process automation and tank level applications where consistent reliable pressure management are essential.
Accuracy: ±0.2TD% SPAN
Supply Voltage: 10.5 to 55VDC
Output Signal: 4-20mA Two wire
Sensor Response Time: 200 mS
Operating Temperature: -20 to 70°C (-4 to 160°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Media Temperature: -40 to 120°C (-40 to 250°F)
Media:Fluids and gasses compatible with 316 SS and FKM
Process Connection/Material: Tri-Clamp
Electrical Connection: 4 pin male M12
Isolating Diaphragm: 316L SS
Sensor Fill Fluid: Silicone Oil
Sensor Seal: O-ring, FKM
Housing Material: >316 SS
Long Term Stability: +/- 0.1% URL / year
Damping Time: Selectable, 0 to 100 S
Load Resistance: <(U-10.5)/0.021
Transmission Distance: < 1000m
Power Consumption: 500mW (20.8mA output @ 24VDC)
Ambient Temperature Effects (-20°C to 70°C): ±(0.1+0.1TD) % SPAN
Power Supply Effects: ± 0.005TD% SPAN/V (Zero and Span)
Mounting Position Effects: Apply to any position. Install error less than 0.06 psi can be corrected by PV=0 reset.
Vibration Effects: GB/T 1827.3/IEC61298-3 tests,20g (5-2000HZ, max<±3mm) <0.1% URL
Weight: 1.14 lbs
Complete informations can be found in the spec sheet (PDF), see the "Download" section.
Pressure Transducers and Transmitters
A pressure transducer, often called a pressure transmitter, is a sensor that converts pressure into an analog electrical signal. Although there are various types of transducers, one of the most common is the strain-gage wheatstone bridge pressure transducer.
The conversion of pressure into an electrical signal is achieved by the physical deformation of strain gages which are bonded into the diaphragm of the pressure transducer and wired into a wheatstone bridge configuration. Pressure applied to the transducer produces a deflection of the diaphragm which introduces strain to the gages. The strain will produce an electrical resistance change proportional to the pressure...
* Fields marked with an asterisk are required