High Performance (20 Samples / Sec), High Accuracy. Extremely Versatile yet Easy and Intuitive to Use. Full Autotune PID with Fuzzy Logic Adaptive Control. Strain & Bridge Inputs, 6 Digit Display and Upgraded Platinum Software Now Available. Up to 6 Programmable Control/Alarm/Retransmission Outputs. Up to 99 Programs with 8 Ramps and 8 Soaks, Plus Chaining. USB Interface Allows Set-Up Through Free PC Software. Configuration can be Backed-up/Reloaded with a memory Stick. Meter and Alarm only versions also available. More
The Platinum Series family of microprocessor-based PID controllers offer unparalleled flexibility in process measurement. While extremely powerful and versatile, great care has gone into designing a product that is very easy to set-up and use. The automatic hardware configuration recognition eliminates the need for jumpers and allows the firmware to automatically simplify itself, eliminating all menu options that do not apply to a specific configuration. Offered in 1⁄32, 1⁄16, and 1⁄8 DIN sizes, the 1⁄16 and 1⁄8 DIN models can be configured with dual displays.
Each unit allows the user to select the input type from 9 thermocouple types, PRT/RTD sensors, thermistors, DC voltage, DC current, and Strain & Bridge inputs. The full bidirectional voltage or current inputs are fully scalable to virtually all engineering units, with a selectable decimal point that is perfect for use with pressure, flow, or other process input.
The online configurator may not contain all available options. If you do not find what you are looking for, please contact us.
Free Downloadable Configurator Windows® Application Software
- Fully Configure all PLATINUM Functions/Parameters
- Auto-Connect Through USB Channel
- Load/Save PLATINUM Configuration Files
- Performance Tracking (Charting) with Data Capture
Up to 6 programmable outputs including the isolated analogue and additional features make this the most powerful product in its class. Standard features include: remote set-point for cascaded control, high-high/low-low alarms, external latch reset, external ramp and soak initiation, combination heat/cool control mode and configuration save and transfer.
An advanced multi-stage ramp and soak sequencer supports up to 99 profiles of 8 segment ramp/soak sequences. Profiles may be linked to provide extended sequences and auxiliary outputs may be triggered based on individual Ramp or Soak states to provide external control over blowers, mixers or other auxiliary control functions.
Embedded Ethernet and Serial Communications
Optional “embedded ethernet” on the 1⁄16 and 1⁄8 DIN models allow the units to connect directly to an Ethernet network and transmit data in standard TCP/IP packets, or serve Web pages over a LAN or the Internet. Optional serial communications are also available configurable as RS232 or RS485, with straightforward ASCII commands or MODBUS®. All three types of communications interfaces can be installed and active simultaneously.
The Platinum LabVIEW™ driver is the National Instrument device driver for communicating with Omega Platinum Controllers via Modbus RTU/ASCII and Modbus TCP protocols. The driver allows easy access to the internal data, configuration settings, and operating functions of the Platinum product family.
The LabVIEW™ instrument driver reduces the application development time and simplifies instrument control. With the Platinum LabVIEW driver, customers can quickly communicate with the instrument and develop robust test applications and software.
Support for the easy-to-use DasyLab software solves complex data acquisition and control problems by allowing you to work with flowcharts directly on your PC screen. The high input accuracy, advanced process control, extended sequencing capability and flexible output options of a Platinum controller may be easily integrated with the rich set of function modules provide by the DasyLab software. The DasyLab software may be integrated thru the Platinum serial, Ethernet or USB connections.
|Pt Series Features—Performance||Vs Competition||Benefits|
|Up to 20 Input Samples per Second with 24-bit ADC||Best in class||Improved control for responsive systems such as flow or weight control in factory automation and process industries.|
|Up to 99 Programs with 16 Ramps and Soaks Including Ramp/Soak Events and Remote Start. Chainable for unmatched programmability.||Best in class||Combines with the measurement accuracy feature to provide precise control in menu-driven applications such as plastics, food, and ceramics processing.|
Input Types: Thermocouple, RTD, Thermistor, analogue Voltage, analogue Current
Current Input: 4 to 20 mA, 0 to 24 mA scalable
Voltage Input: ±100 mV, ±1 V, ±10 Vdc single-ended, scalable; ±50 and ±100 mV differential and ratiometric inputs, scalable
Thermocouple Input (ITS 90): K, J, T, E, R, S, B, C, N
RTD Input (ITS 90): 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385, 0.00392 (100Ω only), or 0.003916 (100 Ω only) curves
Thermistor Input: 2252 Ω, 5K Ω, 10K Ω
Strain Input: ±100 mV, ±50 mV
Accuracy: See full table below
Resolution: 0.1° temperature; 10 µV process
Process Voltage: 10M Ω for ±100 mV, 1M Ω for other voltage ranges
Process Current: 5 Ω
Thermocouple: 10K Ω max
Auxiliary Input (Remote Setpoint): 3.5K Ω for 0-10 V, 50K Ω for 0-1 V, 50 Ω for Current
Thermocouple @ 25°C (77°F): 0.05°C/°C (cold junction compensation)
Process/Strain: 50 ppm/°C
A/D Conversion: 24-bit sigma delta
Reading Rate: 20 samples per second
Digital Filter: Programmable from 0.05 seconds (filter = 1) to 6.4 seconds (filter = 128)
CMRR: 120 dB
Excitation: Menu selectable (no jumpers to set) 5, 10, 12, and 24 Vdc @ 25 mA (12 V max for DC powered units).
Setpoint Adjustment: 4 Digit -9999 to +9999 counts; 6 Digit -99999 to +999999
Warm-Up to Rated Accuracy: 30 mins
Action: Reverse (heat), direct (cool), or heat/cool
Auto-Tune: Operator initiated from front panel
Adaptive Tune: User selectable; fuzzy logic continuous PID tuning optimization
Control Modes: ON/OFF or the following time/amplitude proportional control modes; selectable manual or auto PID, proportional, proportional with integral, proportional with derivative
Cycle Time: 0.1 to 199 seconds
Ramp and Soak: Up to 99 saved ramp and soak programs, up to 8 ramp and 8 soak segments with individually selectable events per program
Ramp and Soak Segment Times: 00.00 to 99.59 (HH:MM) or 00.00 to 99.59 (MM:SS)
Analogue Output: Non-isolated, programmable for control or retransmission; Voltage Output 0-10V output. 500Ohms Min. Accuracy 0.1%(1); Current Output 0-20mA output. 500Ohms Max. Accuracy 0.1%(1)(2); Step response time 100ms(3)
DC Pulse: Non-isolated; 10 Vdc at 20 mA
SPST Relay: Single pole, single throw mechanical relay, 250 Vac or 30 Vdc at 3 A (resistive load)
SPDT Relay: Single pole, double throw mechanical relay, 250 Vac or 30 Vdc at 3 A (resistive load)
SSR: 20 to 265 Vac at 0.05 to 0.5 A (resistive load)
Isolated analogue: 1.5kV Isolation(4), programmable for control or retransmission; Voltage Output 0-10V output. 500Ohms Min. Accuracy 0.1%(1); Current Output 0-20mA output. 500Ohms Max. Accuracy 0.1%(1)(2); Step response time 100ms(3)
Isolated DC Pulse: 1.5kV Isolation(4); 10Vdc at 20mA
(1) At 25C.
(2) Output scaling required for stated accuracy. Refer to Platinum Current Output Application Note.
(3) Filter setting of 1.
(4) Isolated outputs not individually isolated.
COMMUNICATIONS (USB STANDARD, OPTIONAL SERIAL AND ETHERNET)
USB: Female micro-USB
Ethernet: Standard RJ45
Serial: Screw terminals
USB: USB 2.0 host or device
Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T autoswitching, TCP/IP, ARP
Serial: Software selectable RS232 or RS485; programmable 1200 to 115.2 K baud
Protocols: Omega ASCII, Modbus® ASCII/RTU
Approvals: UL, cUL, CE
Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option)
Power to Relays/SSR Outputs: 2300 Vac per 1 min test
Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test
RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test
|Thermocouple Input Type||Description||Range||Accuracy|
|Process||Process Voltage||±100 mV, ±1, ±10 Vdc||0.03% FS|
|Process||Process Current||Scalable within 0 to 24 mA||0.03% FS|
|J||Iron-Constantan||-210 to 1200°C (-346 to 2192°F)||0.4°C (0.7°F)|
|K||Chromel-Alumel||-270 to -160°C (-454 to -256°F)
-160 to 1372°C (-256 to 2502°F)
|T||Copper-Constantan||-270 to -190°C (-454 to -310°F)
-190 to 400°C (-310 to 752°F)
|E||Chromel-Constantan||-270 to -220°C (-454 to -364°F)
-220 to 1000°C (-364 to 1832°F)
|R||Pt/13%Rh-Pt||-50 to 40°C (-58 to 104°F)
40 to 1788°C (104 to 3250°F)
|S||Pt/10%Rh-Pt||-50 to 100°C (-58 to 212°F)
100 to 1768°C (212 to 3214°F)
|B||30%Rh-Pt/6%Rh-Pt||100 to 640°C (212 to 1184°F)
640 to 1820°C (1184 to 3308°F)
|C||5%Re-W/26%Re-W||0 to 2320°C (32 to 4208°F)||0.4°C (0.7°F)|
|N||Nicrosil-Nisil||-250 to -100°C (-418 to -148°F)
-100 to 1300°C (-148 to 2372°F)
|RTD||Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω||-200 to 850°C (-328 to 1562°F)||0.3°C (0.7°F)|
|RTD||Pt, 0.003916, 100 Ω||-200 to 660°C (-328 to 1220°F)||0.3°C (0.7°F)|
|RTD||Pt, 0.00392, 100 Ω||-200 to 660°C (-328 to 1220°F)||0.3°C (0.7°F)|
|Thermistor||2252 Ω||-40 to 120°C (-40 to 248°F)||0.2°C (0.35°F)|
|Thermistor||5K Ω||-30 to 140°C (-22 to 284°F)||0.2°C (0.35°F)|
|Thermistor||10K Ω||-20 to 150°C (-4 to 302°F)||0.2°C (0.35°F)|
Use the optional PT-USB-CABLE for an IP65 rated panel mount USB connector. A 300 mm length cable connects from USB port of Platinum controller to your control panel. This accessory includes a protective end cap when not in use.
The PT-USB-ADAPTER, which is supplied with each unit, can be plugged into the controller and be used with a standard USB 2.0 memory stick.
This 1 GB USB thumbdrive has a standard USB connector on one end and a micro-USB connector on the other end. It is convenient for transferring files between your PC and your PLATINUM unit.
Complete informations can be found in the spec sheet (PDF), see the "Download" section.
(1) DIN Size / Display select from:
32PT for 1/32 DIN 4 Digit Single Display
16PT for 1/16 DIN 4 Digit Single Display
16DPT for 1/16 DIN 4 Digit Dual Display
8PT for 1/8 DIN 4 Digit Single Display
8DPT for 1/8 DIN 4 Digit Dual Display
8EPT for 1/8 DIN 6 Digit Single Display
(2) Output Configuration select from:
-330 for 2 SPDT Mechanical Relay Outputs
-220 for 2 Solid State Relay Outputs
-304 for 1 SPDT Mechanical Relay & 1 DC Pulse Output
-305 for 1 SPDT Mechanical Relay & 1 Analog Output
-440 for 2 DC Pulse Outputs
-224 for 2 Solid State Relay & 1 DC Pulse Output
-225 for 2 Solid State Relay & 1 Analog Output
-144 for 1 SPST Mechanical Relay & Two DC Pulse Outputs
-145 for 1 SPST & 1 DC Pulse & 1 Analog Output
-444 for 3 DC Pulse Outputs
-445 for 2 DC Pulse & 1 Analog Output
(3) Isolated Output Configuration select from:
Nothing(leave field blank) for Not Installed
-006 for One Isolated Analog Output(1/8 DIN only)
-776 for Two DC Pulse and One Isolated Analog Output(1/8 DIN only)
(4) Serial Communications select from:
Nothing(leave field blank) for Not Installed
-C24 for RS232 / RS485 Communications
(5) Ethernet Communications select from:
Nothing(leave field blank) for Not Installed
-EIP for Ethernet Communications & Web Server (not available on 1/32 DIN Models)
(6) Power Source select from:
Nothing(leave field blank) for Standard 90 to 240 Vac Powered
-DC for 12 to 36 Vdc Powered
Industrial automation systems are expensive assets, designed to offer reliable performance for years. Typically, industrial systems last for decades. It is impractical than to discard these existing systems when new technology becomes available.
So, how do businesses remain competitive and efficient if they cannot afford to adopt new technology? The scenario is common today for most industrial setups...
Temperature can be measured via a diverse array of sensors. All of them infer temperature by sensing some change in a physical characteristic. Six types with which the engineer is likely to come into contact are: thermocouples, resistive temperature devices (RTDs and thermistors), infrared radiators, bimetallic devices, liquid expansion devices, and change-of-state devices.
Choose the right temperature measurement instrument for your application...
OMEGA is an industrial sensor and measurement solutions provider with over 50 years of experience. With the ability to provide a complete range of instruments and engineering services it would be difficult to find a better partner for the automotive industry.
OMEGA has a track record of providing state-of-the-art sensors and measurement instrumentation for the automotive industry. With our vast experience and knowledge in industrial applications and development of high quality measuring instruments, sensors and complete solutions...
* Fields marked with an asterisk are required