Smart Load Cell Probe

Usually in Stock
€ 139.90 excl. VAT
can be ordered - date of dispatch to be specified
qty
OMEGA Engineering

Autoscaling 350 ohm - 5000 ohm Bridge Input Circuits. Auto adjusted activation current. Hardware and software TARE function. 2-point Linearization. Modular M12 construction. OMEGA Smart Core enabled. Data Logging, Integrated Alarm and Control. Plug and Play Device Detection. Sensor health monitoring. More

Item# (PN): SP-010-1 Shipping and Payment

The Omega Link SP-010 Load Cell Smart Probe provides an easy way to integrate your bridge devices to the Omega Link Ecosystem. The SP-010 accepts 4-wire bridge sensors through its M12 4-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. The M12-S-M-FM accessory connector can be utilized to easily connect wire leads to your SP-010.

The SP-010 determines the bridge impedance and applies an optimized pulsed bridge excitation current during measurements to minimize self-heating effects. The bridge voltage is then used to determine the applied force using bridge characteristics provided by the user.

A 2-point linearization correction may be applied with the ability to capture the measured values. TARE weight adjustment can be triggered through software or external switch closures.

Intuitive Configuration

Configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface.

Edge Control and Built in I/O

The Omega Link SP-010 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-010 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.

Smart Core Enabled

Smart core is integral to all Omega Link Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.

Smart Interface Modularity

Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.

Your Data at a Glance with Omega Link Cloud

Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity.

SPECIFICATIONS:

Input power voltage: 2.8 VDC - 3.3 VDC

DIO DIGITAL INPUTS
VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC

DIO DIGITAL OUTPUTS
2x Open Drain 100 mA max
VMAX= 30 VDC

Supported Strain Gauges:
Bridge Sensitivity: 1 to 15 mV/V
Bridge Resistance: 250 to 15000 Ohm
Accuracy:
Linearity Error: ±0.03% FSO
Thermal Error: ±0.005% FSO/C
Operating Temperature: -40 to 85°C
Rating: IP67 when mated
Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs

Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks

Accessories3