Česky (CZK)StabiliSENSE™ Critical Room Status Monitor
Long-term stable pressure measurements. User-configurable graphical interface. Monitors up to 3 rooms with a single unit. Displays up to 4 parameters including pressure, relative humidity, temperature, air change, and/or door status. More
The Series RSMC StabiliSENSE Critical Room Status Monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, school nurses offices, laboratories, and vivariums.
The RSMC is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSMC StabiliSENSE critical room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.
Each RSMC includes a factory calibration certificate.
Product Applications:
Hospital isolation rooms, Pharmaceutical facilities, Dental offices, School nurse offices, Semiconductor manufacturing facilities.
The model configurator above works with INWC pressure units (inch of water column, inH₂O). 1 INWC = 249.1 Pa, see table below.
| RANGES (conversion of INWC [inH₂O] to Pa/kPa) | ||
| INWC | Pa | kPa |
| 0,100 | 24,91 | |
| 0,250 | 62,27 | |
| 0,500 | 124,5 | 0,1245 |
| 1,000 | 249,1 | 0,2491 |
| 2,500 | 622,7 | 0,6227 |
| 5,000 | 1245 | 1,245 |
| 10,00 | 2491 | 2,491 |
| 25,00 | 6227 | 6,227 |
| 50,00 | 12,45 | |
| 100,0 | 24,91 | |
SPECIFICATIONS:
Alarm: 69.1 dB 10 cm from display
Display: 4.3" (10.9 cm) color TFT LCD, dimmable; resolution 480 x 272 px
Display Measuring Units: °C, °F, Pa, kPa, cm w.c., mm w.c., in w.c.
Output Signal: current, voltage, digital
Input Control Signal: 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc
Materials, Wetted: ABS, PMMA, Polycarbonate
Data Interface: BACnet MS/TP, Modbus RTU
Operating Temperature: 0 to 50 °C
Supply Voltage: 24 Vac/Vdc
Power Consumption: 3.6 W
Complete informations can be found in the spec sheet (PDF), see the "Download" section.
Pressure Transducers and Transmitters
A pressure transducer, often called a pressure transmitter, is a sensor that converts pressure into an analog electrical signal. Although there are various types of transducers, one of the most common is the strain-gage wheatstone bridge pressure transducer.
The conversion of pressure into an electrical signal is achieved by the physical deformation of strain gages which are bonded into the diaphragm of the pressure transducer and wired into a wheatstone bridge configuration. Pressure applied to the transducer produces a deflection of the diaphragm which introduces strain to the gages. The strain will produce an electrical resistance change proportional to the pressure...
eBook / Automotive
OMEGA is an industrial sensor and measurement solutions provider with over 50 years of experience. With the ability to provide a complete range of instruments and engineering services it would be difficult to find a better partner for the automotive industry.
OMEGA has a track record of providing state-of-the-art sensors and measurement instrumentation for the automotive industry. With our vast experience and knowledge in industrial applications and development of high quality measuring instruments, sensors and complete solutions...
Related products8
Magnehelic® Transmitter for Low DP Monitoring in HVAC
Digihelic® Differential Pressure Controller
DigiMag® Differential Pressure Transmitter
Magnehelic® Differential Pressure Transmitter
Differential Pressure Transmitter
High Accuracy Pressure Transmitter
Differential Pressure Transmitter with optional LCD
